GW3 15

Power Outputs

  r/min 1500
Continuous Power kW 28
bhp 37.5
Overload Power kW 30
bhp 40.2

Notes:

1. Power ratings measured at the flywheel and fuel consumptions, apply to a fully run-in, non derated engine without a radiator and fan fitted and other power absorbing accessories or transmission equipment
2. The overload (intermittent) capability applies to a fully run-in engine.  This is normally attained after a running period of about 50 hours.

Download Datasheet
Contact Us
GW3 15

GW3 15

Power Output: 30 kW; 40.2 bhp
Fixed speed; full-load speed: 1500 r/min
Naturally aspirated heavy duty G Build diesel engine

Special Attributes

• suitable for generating sets
• 250-hour service intervals
• continuous operation in ambient temperatures up to 45°C (113°F)
• cold start down to –20°C (-4°F)
• shut down solenoid (energised to run)

Basic Engine Characteristics

• three cylinders
• diesel fuelled
• direct injection
• liquid cooled
• naturally aspirated

Design Features and Equipment

• standard oil and fuel filters
• 12V electric start (optional 24V)
• anti clockwise rotation, looking on flywheel end
• SAE 10” and 11.5” flywheel
• SAE3 flywheel housing
• radiator with fan guard
• cast-iron crankcase
• self-vent fuel system
• inline fuel injection pump
• flywheel with ring gear
• air cleaner
• oil pressure sender/switch combination
• water temperature sender / switch combination
• spin-on lubricating-oil filter
• fuel filter / agglomerator
• inlet and exhaust manifolds
• operators’ handbook