Power Outputs

Power r/min 1500 1800
Continuous kW 11 13.1
bhp 14.8 17.6
Fuel Stop kW 12.1 14.4
bhp 16.2 19.3


1. Power ratings measured at the flywheel and fuel consumptions, apply to a fully run-in, non derated engine without a radiator and fan fitted and other power absorbing accessories or transmission equipment
2. The overload (intermittent) capability applies to a fully run-in engine.  This is normally attained after a running period of about 50 hours.

Download Datasheet
Contact Us


Power range: 11.0 - 14.4 kW; 14.8 - 19.3 bhp
Fixed speeds: 1500, 1800 r/min
Reliable, durable two cylinder air cooled G Build diesel engine

Special Attributes

• suitable for generating sets
• designed for continuous operation in ambient temperatures up to 52°C (122°F)
• oil cooling by means of air flow over deep crankcase finning

Basic Engine Characteristics

• diesel fuelled
• direct injection
• two cylinders
• air cooled
• naturally aspirated
• electric start (hand start optional)

Design Features and Equipment

• medium duty air cleaner*
• inlet and exhaust manifolds
• fuel injection pump and self-vent fuel system
• fuel filter
• fuel lift pump*
• self-regulating plunger type lubricating oil pump
• spin-on lubricating oil filter
• decompressor lever
• flywheel with cooling fan**
• flywheel housing with SAE 4 flange**
• mechanical governing
• 12V starter motor*
• safety switches*
• fuel control solenoid (energised to run)*
• standard skid base packing
• 250 hour service intervals
• operators' handbook


• complies with EU Stage 3A emissions regulations

Optional Items

• 12V battery charge windings
• SAE4:5 ventilated adaptor
• SAE4:4 ventilated adaptor
• 7.5" drive member
See also items with asterisk under Design Features and Equipment.
NOTE: T range genset engines are configured to accept dedicated single bearing alternators manufactured specifically to suit the TR bare flywheel arrangement. For alternators other than these it will be necessary to add to the specifications a ventilated adaptor (SAE4 or SAE5) and a drive member (TR2 - 7.5").